Our complete User manuals as PDF files: English, German, Spanish, French, Italian, Danish, Dutch

Instructions for use

 Precautions and warnings

·         Do not use SleepStrip if you have a cold, a
congested nose, or any other type of respiratory

       tract ailment.

·          Consult your doctor if you develop a rash or
other reaction on your face after using SleepStrip.

 Do not open the SleepStrip package until ready to use.
 Store the unopened SleepStrip in a cool, dry place.
 Do not pause in between steps.

 1. Just before going to sleep, remove the

     SleepStrip and the green sticker from the

     wrapper.

 2. Fold the nose sensors forward (figure 1).

 3. Remove the alcohol prep pad from the wrapper,

     and rub the display area (figure 2).

 4. Peel the green sticker off its paper cover and attach

     it firmly to display area (figure 3).

     The red light should turn ON.

 5. Peel the protective paper from the back of the

     SleepStrip and apply the SleepStrip to face (figure 4).

     The red light should turn OFF, and then blink each

     time you exhale.

     (The blinking will stop after approximately 20 minutes)

6. In the morning, remove the SleepStrip

    and return it to your doctor.

    (The red light will turn ON shortly after

    removing SleepStrip^® from face.)